BE AWARE
PLEASE READ MY TOU
DATE WRITTEN: Oct 11, 2009
©SassynSimple Tutorials
THINGS NEEDED
PAINTSHOP PRO X2 OR SIMILAR PROGRAM.
My tutorials can be adapted to other versions some settings may vary slightly.
You must have a good working knowledge of the programs I use.
TUBE: Barbara Jensen you must buy it HERE
THINGS NEEDED
PAINTSHOP PRO X2 OR SIMILAR PROGRAM.
My tutorials can be adapted to other versions some settings may vary slightly.
You must have a good working knowledge of the programs I use.
TUBE: Barbara Jensen you must buy it HERE
KIT: Linda’s Dream Designs and MediEvils Designs Cancer Awareness Full size kit. You can purchase it HERE
MASK: Zunzzana-mask60 HERE
If you choose a different kit re-sizing may change if it is not a full size kit.
Let's Begin
The Following steps must be done but I will not repeat them each time.
We will use same drop shadow unless I state otherwise.
Always Close original image after you copy unless stated otherwise.
Re-size settings HERE Always sharpen re-sized items one time.
Open you tube and the Zuzzanna-mask60 minimize for now
1. Open a new transparent image 700X650
Selections/select all.
Select Paper 14 from the kit edit/copy, edit/paste into selection.
Selections/select none
2. Select your dropper tool select a color from tube
Left mouse click for foreground and right mouse click for background.
3. Select your text tool (settings below)
Type out your Text Always Have A Check Up (note I put Check up on a Second Line) Objects/Align Center in Canvas.
Using your nodes Size your Text.
Rotate Text see settings on bottom bar of psp program (image below)
Convert to a Raster Layer
Proceed to next step for text placement. 
Rotation of Text
4. Effects/Mura’s Meister/Copies settings Below.
layers Palette slide Opacity down to 65.
Layers palette/right click layer/merge/merge down into your background layer.
5. Add a New Raster layer. Selections/select all
Select paper 13 from the Kit Edit./copy,
Edit/paste into selection. Selections/select none
6. Select Zuzzanna-mask60
Image/rotate right (this is not the free rotate option) minimize it.
Layers/New Mask layer/from image Select Zuzzanna-mask60 in the box
Make sure source Luminance is checked and invert mask data is checked
Click ok.
7. Layers palette with your mouse Right click on the white and
black mask in your layers palette, Select delete click yes,
When it ask “Would you like this mask merged into the Layer below it” select yes.
Right click top mask merge/merge group. Re-size the mask 85%.
Effects/3D/ Drop Shadow settings below.
Vertical and horizontal 2
Opacity 70
Blur 5.00
Color black
8. Select Frame 1 from the Kit Edit/copy,
Edit/paste as new layer into your image.
Re-size the Frame 15%.
Apply your drop shadow.
9. Select your Selection Tool Draw out a rectangle behind your frame.
start at the top right corner selection left corner of the frame
Pull to the bottom left corner of frame
Keep Selected
10. Add a New Raster Layer below your Frame.
Select Paper 4 From The Kit Edit/copy,
Edit/paste into selection.
Selections/ Select none.
11. Select your Tube Edit/copy,
Edit/paste as new layer into your image under your frame.
Re-size as needed.
Duplicate your Tube.
Right click This layer in your layer palette Arrange bring to top.
Use eraser tool to remove any parts you do not want to cover your frame and ribbon.
Click back on your Tube Layer under your frame and apply same drop shadow.
12. Select The Flower Branch 2 in the kit Edit/copy,
Edit/paste as new layer into your image.
Re-size it 25%,
With your eraser tool erase the branch part.
Apply Drop shadow.
Arrange it at the bottom of the frame refer to my image
layers palette/right click/Duplicate this layer 1 time.
Image/ mirror the duplicated copy.
13. Select the Ribbon element from the Kit. Edit/copy,
Edit/paste as new layer into your image.
Re-size it 15%.
Apply same drop shadow.
Move it to the center of your Flowers.
14. Right Click on your Layers Palette and merge visible.
15. Select the Letters From the Apha folder To Spell out Be Aware.
Re-size them 15%.
Arrange them at the top of your image. Refer to my image.
Apply drop shadow to each one.
16. Select the Tag element from The Kit. Edit/copy,
Edit/paste as new layer into your image.
Re-size it 15%. Apply same drop shadow.
Move it to the Left side and place it right under Your B.
Duplicate it and move the duplicate so that it is under your E.
Do not mirror it.
17. Image/add border 5 symmetric checked.
With your magic wand (settings below) Click on the border.
Select your dropper tool and select a color from your image left click/foreground color
Flood fill the border selection.
Apply drop shadow.
Go Back and apply drop shadow again but Change Vertical and Horizontal to -2. Selections/select none.
18. Image/add border 15 symmetric checked.
Click on it with your magic wand
Select Paper 7 from the kit Edit copy, Edit paste into selection.
Selection/select none.
19. Image/add border 5 symmetric checked.
With your magic wand Click on the border.
Select your dropper tool and select a color from your image left click/foreground
Flood fill the border selection.
Apply drop shadow.
Go Back and apply drop shadow again but Change Vertical and Horizontal to -2. Selections/select none.
20. Apply your watermark and copyrights. Re-size image so that width is no more than 500.
Make a folder and save your image in it.
layers Palette slide Opacity down to 65.
Layers palette/right click layer/merge/merge down into your background layer.
5. Add a New Raster layer. Selections/select all
Select paper 13 from the Kit Edit./copy,
Edit/paste into selection. Selections/select none
6. Select Zuzzanna-mask60
Image/rotate right (this is not the free rotate option) minimize it.
Layers/New Mask layer/from image Select Zuzzanna-mask60 in the box
Make sure source Luminance is checked and invert mask data is checked
Click ok.
7. Layers palette with your mouse Right click on the white and
black mask in your layers palette, Select delete click yes,
When it ask “Would you like this mask merged into the Layer below it” select yes.
Right click top mask merge/merge group. Re-size the mask 85%.
Effects/3D/ Drop Shadow settings below.
Vertical and horizontal 2
Opacity 70
Blur 5.00
Color black
8. Select Frame 1 from the Kit Edit/copy,
Edit/paste as new layer into your image.
Re-size the Frame 15%.
Apply your drop shadow.
9. Select your Selection Tool Draw out a rectangle behind your frame.
start at the top right corner selection left corner of the frame
Pull to the bottom left corner of frame
Keep Selected
10. Add a New Raster Layer below your Frame.
Select Paper 4 From The Kit Edit/copy,
Edit/paste into selection.
Selections/ Select none.
11. Select your Tube Edit/copy,
Edit/paste as new layer into your image under your frame.
Re-size as needed.
Duplicate your Tube.
Right click This layer in your layer palette Arrange bring to top.
Use eraser tool to remove any parts you do not want to cover your frame and ribbon.
Click back on your Tube Layer under your frame and apply same drop shadow.
12. Select The Flower Branch 2 in the kit Edit/copy,
Edit/paste as new layer into your image.
Re-size it 25%,
With your eraser tool erase the branch part.
Apply Drop shadow.
Arrange it at the bottom of the frame refer to my image
layers palette/right click/Duplicate this layer 1 time.
Image/ mirror the duplicated copy.
13. Select the Ribbon element from the Kit. Edit/copy,
Edit/paste as new layer into your image.
Re-size it 15%.
Apply same drop shadow.
Move it to the center of your Flowers.
14. Right Click on your Layers Palette and merge visible.
15. Select the Letters From the Apha folder To Spell out Be Aware.
Re-size them 15%.
Arrange them at the top of your image. Refer to my image.
Apply drop shadow to each one.
16. Select the Tag element from The Kit. Edit/copy,
Edit/paste as new layer into your image.
Re-size it 15%. Apply same drop shadow.
Move it to the Left side and place it right under Your B.
Duplicate it and move the duplicate so that it is under your E.
Do not mirror it.
17. Image/add border 5 symmetric checked.
With your magic wand (settings below) Click on the border.
Select your dropper tool and select a color from your image left click/foreground color
Flood fill the border selection.
Apply drop shadow.
Go Back and apply drop shadow again but Change Vertical and Horizontal to -2. Selections/select none.
18. Image/add border 15 symmetric checked.
Click on it with your magic wand
Select Paper 7 from the kit Edit copy, Edit paste into selection.
Selection/select none.
19. Image/add border 5 symmetric checked.
With your magic wand Click on the border.
Select your dropper tool and select a color from your image left click/foreground
Flood fill the border selection.
Apply drop shadow.
Go Back and apply drop shadow again but Change Vertical and Horizontal to -2. Selections/select none.
20. Apply your watermark and copyrights. Re-size image so that width is no more than 500.
Make a folder and save your image in it.
BACKGROUND
Sorry my server lost background image and I did not have it backed up
Sorry my server lost background image and I did not have it backed up
1. Open new transparent image. 1280x300. Selection select all.
Select paper 14 from the kit Copy and paste into selection.
Selections/ Select none.
2, Effects/Image Effects/seamless tiling use settings below.
3. Select the Ribbonette Element from The Kit Edit/copy,
Edit/paste as new layer into your image.
Re-size it 10%.
You will need to re-size it once more at 40%.
Apply same drop shadow.
Move it to the left border.
Duplicate it 2 times. Arrange the bottom layer at the top,
The middle Layer at the bottom and Top layer in middle.
Refer to my image
4. Merge Visible
Save your Image in the folder you made,
by going to File/Export/Jpeg Optimizer Value set at 30
I hope you enjoyed the Tutorial.
I want to Thank all those that tested my Tutorials for me.
